Tools | dooshop.co.uk

Homepage
All categories

More Filters

Trend SNAPPY Hex Shank Dowel Drill Bit 8mm

£ 2.49 by Trend at Tooled Up (5.388) Trend SNAPPY Hex Shank Dowel Drill Bit 8mm Hex shank carbon steel lip and spur (Brad point) dowel drill bit for drilling blind holes in wood. The dowel d Shipping + £ 2.95 + £ 2.95

Trend Bearing Guided Bevel Trimmer Router Cutter 29mm 13mm 1/4"

£ 41.95 by Trend at Tooled Up (5.388) Trend Bearing Guided Bevel Trimmer Router Cutter 29mm 13mm 1/4" Cut a wider edge line, at an angle of 60 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearin Shipping + £ 3.95 + £ 3.95

Trend CRAFTPRO Chamfer Bearing Guided Router Cutter 32mm 12.7mm 8mm

£ 25.95 by Trend at Tooled Up (5.388) Trend CRAFTPRO Chamfer Bearing Guided Router Cutter 32mm 12.7mm 8mm Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. D: 32 mm C: 1/2 inch C: 12.7 mm B: 9.5 Shipping + £ 3.95 + £ 3.95

Trend SNAPPY WS Drill Bit 9/64" Pack of 10

£ 15.95 by Trend at Tooled Up (5.388) Trend SNAPPY WS Drill Bit 9/64" Pack of 10 Pack of 10 spare drills to suit the drill countersinks. Supplied in a storage tube. D: 9/64 inch D: 3.5 mm OL Shipping + £ 3.95 + £ 3.95

Trend Replacement Cutter Bearings Metric OD 20mm

£ 10.95 by Trend at Tooled Up (5.388) Trend Replacement Cutter Bearings Metric OD 20mm Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned wi Shipping + £ 3.95 + £ 3.95

Trend CRAFTPRO Bearing Guided Corner Bead Router Cutter 31.9mm 22.5mm 1/2"

£ 37.95 by Trend at Tooled Up (5.388) Trend CRAFTPRO Bearing Guided Corner Bead Router Cutter 31.9mm 22.5mm 1/2" Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. D: 31.9 mm Shipping + £ 3.95 + £ 3.95

Trend Corner Bead Bearing Guided Router Cutter 22mm 18.9mm 1/4"

£ 49.95 by Trend at Tooled Up (5.388) Trend Corner Bead Bearing Guided Router Cutter 22mm 18.9mm 1/4" Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. TCT fe Shipping + £ 3.95 + £ 3.95

Trend CRAFTPRO Intumescent Strip Router Cutter 24mm 15mm 1/4"

£ 29.95 by Trend at Tooled Up (5.388) Trend CRAFTPRO Intumescent Strip Router Cutter 24mm 15mm 1/4" Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. To su Shipping + £ 3.95 + £ 3.95

Trend Eccentric Single Flute Router Cutter 9.5mm 25mm 1/2"

£ 26.95 by Trend at Tooled Up (5.388) Trend Eccentric Single Flute Router Cutter 9.5mm 25mm 1/2" Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference Shipping + £ 3.95 + £ 3.95

Trend STC Spiral Upcut Router Cutter 4.75mm 19mm 1/4"

£ 35.95 by Trend at Tooled Up (5.388) Trend STC Spiral Upcut Router Cutter 4.75mm 19mm 1/4" Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. F Shipping + £ 3.95 + £ 3.95

Trend CRAFTPRO Round Over and Ovolo Router Cutter 38mm 19.1mm 1/4"

£ 40.95 by Trend at Tooled Up (5.388) Trend CRAFTPRO Round Over and Ovolo Router Cutter 38mm 19.1mm 1/4" Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Shipping + £ 2.95 + £ 2.95

Trend Flat Ogee Router Cutter 20mm 15mm 1/2"

£ 45.95 by Trend at Tooled Up (5.388) Trend Flat Ogee Router Cutter 20mm 15mm 1/2" Produces an elegant edge mould, or a shallow panel effect when routing on its full width. D: 20 mm C: 15 mm R Shipping + £ 3.95 + £ 3.95

Trend CRAFTPRO Two Flute Straight Router Cutter 12mm 19.1mm 1/4"

£ 13.95 by Trend at Tooled Up (5.388) Trend CRAFTPRO Two Flute Straight Router Cutter 12mm 19.1mm 1/4" Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on Shipping + £ 2.95 + £ 2.95

Trend CRAFTPRO Router Dowel Drill 3mm 14mm 8mm

£ 24.95 by Trend at Tooled Up (5.388) Trend CRAFTPRO Router Dowel Drill 3mm 14mm 8mm Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. For drilling machines Shipping + £ 3.95 + £ 3.95

Trend Large Bearing Guided Ogee Panel Raiser Router Cutter 85.7mm 15.9mm 1/2"

£ 81.95 by Trend at Tooled Up (5.388) Trend Large Bearing Guided Ogee Panel Raiser Router Cutter 85.7mm 15.9mm 1/2" Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with Shipping + £ 3.95 + £ 3.95

Trend Snappy TCT Drill Countersink For Wood Screws 5mm

£ 22.95 by Trend at Tooled Up (5.388) Trend Snappy TCT Drill Countersink For Wood Screws 5mm Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable HSS drill. This Shipping + £ 2.95 + £ 2.95

Trend Snappy 3 Piece No10 Plug Cutter Screw Set

£ 33.95 by Trend at Tooled Up (5.388) Trend Snappy 3 Piece No10 Plug Cutter Screw Set Four piece plug cutter and drill countersink set. The set comprises Quick chuck, Drill/countersink, Pozi 50 mm Shipping + £ 3.95 + £ 3.95

Trend Cove Bearing Guided Router Cutter 34.9mm 16mm 1/2"

£ 60.95 by Trend at Tooled Up (5.388) Trend Cove Bearing Guided Router Cutter 34.9mm 16mm 1/2" The two bearings supplied offer the means of cutting different depths of mouldings. D: 34.9 mm C: 16 mm B: 9. Shipping + £ 3.95 + £ 3.95

Trend Slow Spiral HSS Twist Drill 5/16"

£ 13.95 by Trend at Tooled Up (5.388) Trend Slow Spiral HSS Twist Drill 5/16" Slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open Shipping + £ 3.95 + £ 3.95

Trend Classic Decorative Panel Mould Router Cutter 12mm 7mm 1/4"

£ 37.95 by Trend at Tooled Up (5.388) Trend Classic Decorative Panel Mould Router Cutter 12mm 7mm 1/4" To create profiles in the face or edge of drawer fronts and cabinet doors. D: 12 mm C: 7 mm R: 2 mm R2: 4 mm Shipping + £ 3.95 + £ 3.95

Trend Snappy TCT Glass Drill Bit 5mm

£ 8.95 by Trend at Tooled Up (5.388) Trend Snappy TCT Glass Drill Bit 5mm TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be use Shipping + £ 2.95 + £ 2.95

Trend Eccentric Single Flute Router Cutter 3mm 11mm 1/4"

£ 25.95 by Trend at Tooled Up (5.388) Trend Eccentric Single Flute Router Cutter 3mm 11mm 1/4" Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference Shipping + £ 3.95 + £ 3.95

Trend Drainer Groove Pro Frame

£ 260.95 by Trend at Tooled Up (5.388) Trend Drainer Groove Pro Frame Frame for routing drainer grooves in solid timber and solid surface worktops. Made from 12mm hardwearing CNC m Shipping + £ 5.95 + £ 5.95

Trend Router Drill Countersunk Counterbore 12mm 20mm 1/4"

£ 50.95 by Trend at Tooled Up (5.388) Trend Router Drill Countersunk Counterbore 12mm 20mm 1/4" For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to rec Shipping + £ 3.95 + £ 3.95

Trend Two Flute PTFE Coated Non Stick Router Cutter 10mm 35mm 1/2"

£ 23.95 by Trend at Tooled Up (5.388) Trend Two Flute PTFE Coated Non Stick Router Cutter 10mm 35mm 1/2" Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, Shipping + £ 3.95 + £ 3.95

CK Precision Universal Fine Blunt Tip Tweezers 115mm

£ 9.95 by CK Tools at Tooled Up (5.388) CK Precision Universal Fine Blunt Tip Tweezers 115mm Carbon steel, hardened and fine nickel plated. Fine, blunt tips, 2mm wide, finely milled inside. Size = 115mm Shipping + £ 2.95 + £ 2.95

Festool Platin 2 Super Finishing 150mm Polishing Disc 1000g Pack of 15

£ 52.95 by Festool at Tooled Up (5.388) Festool Platin 2 Super Finishing 150mm Polishing Disc 1000g Pack of 15 Festool Platin 2 150mm Super Finishing Polishing Disc's are suitable for use with RO 150, ES 150, ETS 150, ETS Shipping + £ 3.95 + £ 3.95

Trend 4 Piece Kitchen Fitters Router Cutter Set

£ 100.95 by Trend at Tooled Up (5.388) Trend 4 Piece Kitchen Fitters Router Cutter Set Five piece cutter pack aimed at kitchen fitters. Pack includes five 1/2 inch x 50mm cut length worktop cutters Shipping + £ 3.95 + £ 3.95

Trend Snappy Forstner Drill Bit 25mm

£ 21.95 by Trend at Tooled Up (5.388) Trend Snappy Forstner Drill Bit 25mm High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the T Shipping + £ 3.95 + £ 3.95

Draper Flare Nut Spanner Metric 9mm x 11mm

£ 2.95 by Draper at Tooled Up (5.388) Draper Flare Nut Spanner Metric 9mm x 11mm Designed for use on compression nuts fitted on petrol, diesel injection pipes and hydraulic gas or refrigerati Shipping + £ 3.95 + £ 3.95

Draper Flare Nut Spanner Metric 19mm x 22mm

£ 5.95 by Draper at Tooled Up (5.388) Draper Flare Nut Spanner Metric 19mm x 22mm Designed for use on compression nuts fitted on petrol, diesel injection pipes and hydraulic gas or refrigerati Shipping + £ 3.95 + £ 3.95

Trend Panel Cut Mould Router Cutter 26mm 6mm 1/4"

£ 46.95 by Trend at Tooled Up (5.388) Trend Panel Cut Mould Router Cutter 26mm 6mm 1/4" Edge moulds of classic proportions. Used to obtain decorative channels. D: 26 mm C: 6 mm C2: 10 mm R: 2 mm R2 Shipping + £ 3.95 + £ 3.95

Trend WS Plug Maker 1" 1/4" 1/2"

£ 101.95 by Trend at Tooled Up (5.388) Trend WS Plug Maker 1" 1/4" 1/2" Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth For Shipping + £ 3.95 + £ 3.95

Trend Bearing Guided Template Profiler Router Cutter 15.9mm 12.7mm 1/4"

£ 20.95 by Trend at Tooled Up (5.388) Trend Bearing Guided Template Profiler Router Cutter 15.9mm 12.7mm 1/4" Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Ext Shipping + £ 3.95 + £ 3.95

Trend HSS Drill Countersink Size 8 5/8"

£ 19.95 by Trend at Tooled Up (5.388) Trend HSS Drill Countersink Size 8 5/8" They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slo Shipping + £ 3.95 + £ 3.95

Trend TCT Cylinder Boring Bit 203 Series 25mm

£ 52.95 by Trend at Tooled Up (5.388) Trend TCT Cylinder Boring Bit 203 Series 25mm Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling h Shipping + £ 3.95 + £ 3.95

Trend Roman Ogee Bowl Bearing Guided No Lip Router Cutter 57mm 32mm 1/2"

£ 81.95 by Trend at Tooled Up (5.388) Trend Roman Ogee Bowl Bearing Guided No Lip Router Cutter 57mm 32mm 1/2" Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathro Shipping + £ 3.95 + £ 3.95

Trend Replacement Cutter Bearings Metric OD 28mm

£ 11.95 by Trend at Tooled Up (5.388) Trend Replacement Cutter Bearings Metric OD 28mm Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build- Shipping + £ 3.95 + £ 3.95

Trend CRAFTPRO Bearing Guided Combination Ogee Router Cutter 41mm 17mm 1/2"

£ 51.95 by Trend at Tooled Up (5.388) Trend CRAFTPRO Bearing Guided Combination Ogee Router Cutter 41mm 17mm 1/2" The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scribe Shipping + £ 3.95 + £ 3.95

Trend Panel Mould Wide Ogee Router Cutter 25mm 10mm 1/4"

£ 57.95 by Trend at Tooled Up (5.388) Trend Panel Mould Wide Ogee Router Cutter 25mm 10mm 1/4" Panel raisers can be used with guide bush templates for decorative work on panel doors etc. D: 25 mm D2: 10 m Shipping + £ 3.95 + £ 3.95

Trend Planer Blade Conversion Kit 82mm

£ 11.95 by Trend at Tooled Up (5.388) Trend Planer Blade Conversion Kit 82mm Contains a pair of plates to allow the PB/29 blades to be fitted into the planer cutter block for certain Maki Shipping + £ 3.95 + £ 3.95

Trend Aluminium UPVC Single Flute Helical Upcut Cutter 10mm 14mm 8mm

£ 22.95 by Trend at Tooled Up (5.388) Trend Aluminium UPVC Single Flute Helical Upcut Cutter 10mm 14mm 8mm Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters Shipping + £ 3.95 + £ 3.95

Trend CRAFTPRO 3 Flute Bearing Guided Trimmer Router Cutter 12.7mm . 1/4"

£ 16.95 by Trend at Tooled Up (5.388) Trend CRAFTPRO 3 Flute Bearing Guided Trimmer Router Cutter 12.7mm . 1/4" Three flute self-guiding for extra fine trimming of laminate or plywood overlay. D: 1/2 inch D: 12.7 mm C: 1/ Shipping + £ 3.95 + £ 3.95

Trend Snappy Hex Shank HSS Drill Bit 5mm

£ 5.49 by Trend at Tooled Up (5.388) Trend Snappy Hex Shank HSS Drill Bit 5mm The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick C Shipping + £ 2.95 + £ 2.95

Trend TRADE RANGE Staggered Mortise Router Cutter 16mm 12mm

£ 35.95 by Trend at Tooled Up (5.388) Trend TRADE RANGE Staggered Mortise Router Cutter 16mm 12mm For deep mortising & grooving giving good chip clearance. Will plunge to a depth of 70mm in a number of passes Shipping + £ 3.95 + £ 3.95

Trend Bearing Guided Classic Panel Raiser Router Cutter 63.5mm 12.7mm 1/2"

£ 79.95 by Trend at Tooled Up (5.388) Trend Bearing Guided Classic Panel Raiser Router Cutter 63.5mm 12.7mm 1/2" Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with Shipping + £ 3.95 + £ 3.95

Trend Diamond Tapered File 3", 75mm Fine Pack of 1

£ 32.95 by Trend at Tooled Up (5.388) Trend Diamond Tapered File 3", 75mm Fine Pack of 1 A versatile 3 inch half round/flat tapered file suitable for woodworking, gardening & domestic tooling. Precis Shipping + £ 3.95 + £ 3.95

Trend Undercut Bevel No Bearing Router Cutter 23mm 25mm 3/8"

£ 66.95 by Trend at Tooled Up (5.388) Trend Undercut Bevel No Bearing Router Cutter 23mm 25mm 3/8" Especially designed bevel cutter for routing Corian, which is used in many bathrooms and kitchens. D: 23 mm Shipping + £ 3.95 + £ 3.95

Previous page
1
...
52
53
54
...
209
Next page